EVA Light Yellow Translucent Slow Curing Time for Smooth Surfaces

• Customization: Available
• Application: Packing
• Bonding Function: Instant Adhesive
• Model NO.: 1016
• Color: Light Yellow Translucent
• Composition: Inorganic Material
• Morphology: Solid-State
• Main Agent Composition: EVA
• Appearance: Light Yellow Translucent Particles
• Viscosity: 180ºC, 1500±500
• Softening Point: 85ºC±5ºC
• Application Temperature: 160ºC-180ºC
• Curing Time: 10-15s
• CAS No.: 24937-78-8
• Einecs: 619-160-8
• Transport Package: Bag
• Specification: 25kg/Bag
• Trademark: highkings
• Origin: Foshan Guangdong China
• HS Code: 3506919090
• Production Capacity: 2000tons/Year
• Package Size: 30.00cm * 20.00cm * 5.00cm
• Package Gross Weight: 1.000kg

Product Description

Hot melt adhesive for Automatic packaging production line suitable for laminated and smooth surface cartons

Precision-engineered for blistering line speeds, our hot melt adhesive powers continuous packaging production with battle-tested reliability. Optimized for laminated and glossy cartons, it conquers adhesion failure while ensuring zero interruption across robotic sealers, case erectors, and automated filling lines.
Key Technical Advantages
Zero-Interruption Production
Ultra-stable viscosity eliminates carbon buildup even on silica-coated cartons
Clog-free flow >99% uptime with zero nozzle scrubbing
Material Mastery
Dominates challenging surfaces: Superior grab on laminated films, UV coatings & high-gloss cartons
Intelligent open-time control adapts to varying line speeds and complex folds
Operational Efficiency
Low-viscosity formula slashes pump resistance by 30%
Unmatched tank stability in high-humidity environments

Specification

Color: Light yellow translucent

Viscosity: 180℃, 1500±500

Operating Temp Range: 160℃-180℃

Melt Point: 85°C±5°C

Curing Time: 10-15s

Main Material: EVA; SIS

Certifications: Non-Toxic, CE, RoHS, SVHC

Company Profile

Foshan Haijinsha Refractory Materials Co., Ltd.

Since: 2014
Location: Sanshui, Foshan, Guangdong, China
Specialty: Pioneers in delivering cutting-edge hot melt adhesive industry solutions.
Capacity: An impressive 20,000 tons per year production capacity.
OEM & ODM Service Available

Specialized laboratories

Factory Capabilities

Foshan HQ R&D Center: A sprawling 500+ sqm dedicated lab, equipped with over 100 substrate adhesion testing platforms.
Comprehensive Material Analysis Reports: Detailed insights on viscosity, hardness, open time, weather resistance, and more.
On-site Formulation Consultations: Tailored, engineer-led solutions to conquer unique bonding challenges.

Factory Area: Expansive, purpose-built facility spanning over 3,000 sqm.
Monthly Capacity: Boasting a verified large-scale production capability of over 2,000 MT.
Core Extrusion Tech: Features 3x Fully Automated Screw Lines for consistent, high-precision extrusion output.

Certifications

ISO 9001

MSDS

SVHC

FAQ

1. The Nozzle Or Hose Is Clogged?
Solution:
Increase temperature or switch to low-viscosity glue
→ Raise glue tank temperature by 5~10°C or use a lower viscosity adhesive for smoother flow.
Clean the glue path system
→ Turn off heating, disassemble nozzle/hose, and thoroughly purge with a dedicated cleaning solvent for optimal performance.
Prevent recurrence
→ Empty glue system if idle for more than 30 minutes; ensure daily cleaning of the spray head after operation.

2. Hot Melt Adhesive Is Carbonized?
Solution:
Reduce temperature immediately
→ Lower glue tank temperature by 10~15°C, ensuring it stays within the safe range specified in the technical manual.
Remove carbonized residue
→ Begin by draining the old glue and meticulously scrubbing the tank using a brass brush. This crucial step helps in eliminating any carbon deposits that may have formed.
Ensure glue refill is conducted with precision and care.
→ Maintain a glue level that is greater than 50% during operation. This is essential to prevent any risk of overheating.

3. Is Your Hot Melt Adhesive Gelled?
Solution:
Immediately cease use and proceed to clean the entire system thoroughly.
→ Carefully drain the gelled glue and flush both the tank and pipes using hot oil, ensuring the temperature does not exceed 120°C.
Consider switching to a different adhesive type.
→ Replace the current batch with a new one and consult your supplier for an anti-gelling formula to prevent future occurrences.

4. Are You Experiencing Bubbling in Your Hot Melt Adhesive?
Solution:
Lower the temperature and allow the glue to settle.
→ Set the temperature to the minimum recommended range and let the glue settle for a minimum of 30 minutes before using it.
Opt for a low-moisture adhesive.
→ Select vacuum-sealed glue or request a dry formula from your supplier to ensure optimal results.

5. Is There Smoke Emitting From Your Hot Melt Adhesive?
Emergency Response:
IMMEDIATE SHUT DOWN REQUIRED
→ Instantly cut power to all heaters and activate your ventilation systems.
Inspect the temperature controls thoroughly.
→ Conduct tests or replace any faulty sensors and controllers to ensure proper functionality.
Switch to an adhesive that can withstand higher temperatures.
→ Utilize a higher flash-point glue if smoke continues to persist at normal operating temperatures.